Note link, Part number etc. Page 41 Technology capability for the hard disks. Page 28 – Front Panel Connectors: The system initializes the installed AGP card first. MS Micro-ATX Mainboard Connecting the Speakers When you have set the Multi-Channel Audio Function mode properly in the software utility, connect your speakers to the correct phone jacks in accordance with the setting in software utility. After the software is finished installation, it will automati- cally started every time Windows is initiated.

Uploader: Dall
Date Added: 24 May 2008
File Size: 34.11 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 27394
Price: Free* [*Free Regsitration Required]

AGP is an interface speci- fication designed for the throughput demands of 3D graphics. Click Next to start installing files into the system.

Change these settings only if you are familiar with the chipset. Connectors System Hardware Monitor chipset on-board, you must use a specially de- signed fan with speed sensor to take advantage of the CPU fan control.

If you have questions about this VAT ms, please contact the seller.

K8TM-ILSR (MS-6741)

Refer to the hard disk ks-6741 supplied by hard disk vendors for jumper setting instructions. If set to Setup, password prompt only occurs when you try to enter Setup. Even though 64KB is the recommended setting for most users, you should choose the block size value which is best suited to your specific RAID usage model.


These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Always consult the vendors for proper CPU cooling fan.


Mouse over to Zoom — Click k8t-ilsr ms motherboard. Page 41 Technology capability for the hard disks. If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper.

Power off and Check the Failed Drive: There are two k8hm-ilsr types: Got k8tm-iosr, continue to print. S3-related functions described in jsi section are available only when your BIOS supports S3 sleep mode. Overclocking This motherboard is designed to support overclocking. The system initializes the installed AGP card first.

Seller information owltechuk I figured that if the board had SATA ports and was supposed to support them then I wanted to use them. Page 28 – Front Panel Connectors: Hence, the program screens shown here k8tm-ilxr this appendix may be slightly different from the latest software utility and shall be held for reference only. Hardware Setup Chapter 2. Talk to a Technician Now! Then push it in until the golden finger on the memory module is deeply inserted in the socket.


Avoid clearing the CMOS while the system is on; SATA 1 — 1. Front Panel Audio Connector: You can barely see the golden finger if the module is properly inserted in the socket. Otherwise, the Line-Out connector on the back panel will not function. Page 7 Testing the Connected Speakers This manual also for: A-1for detail software installation procedure. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.

Learn More — opens ms motherboard a new window or tab International shipping and import charges ms motherboard to Pitney Ms-67411 Inc.

Author: admin